Druck LR-Cal TLDMM 2.0 Series, Руководство по эксплуатации

Страница: 51 / 52

DRUCK TEMPERATUR & Leitenberger GmbH • Bahnhofstr. 33 • D-72138 Kirchentellinsfurt • GERMANY
Tel. +49 (0) 7121-90920-0 • Fax +49 (0) 7121-90920-99 • -Info@Leitenberger.de • DT www.druck-temperatur.de
MANUAL
TLDMM Referezdruckmessgerät 2.0
TLDMM reference pressure gauge 2.0
51
Using indexes, you can find every single datalog capture point. Each index has a XXXX PPPP
pressure measurement value, temperature value, and, in the case of manual mode, me, TTTT
which indicates the elapsed me since the sub-cycle started. With the addi on of par al sub-cycle
indexes and capture ming, in the case of automa c mode, you can resonstruct the ming of each
sub-cycle of datalog.
NOTE
Warning: You can download only You cannot download data while a datalog cycle is in progress.
the en re datalog. It is not possible to download the sub-cycle separately. Use the sub cycle index
to iden fy the start and up of each sub cycle.
The
, , commands return the current datalog se ngs and may differ LB000000 L800000 L900000
from the informa on of the last datalog made, sent as a response to the command. L3000000
In the response to command , the string can range from a minimum L600000 XXXXPPPPTTTT
of 8 bytes to a maximum of 16 bytes, is present only if the temperature was recorded in the TTTT
capture cycle, is present only if the capture cycle was manual.