Page
4
DRUCEGROVE Ltd, Unit 12 Abbey Mead Industrial Park,
Brooker Road, Waltham Abbey, Essex EN9 1HU
Phone:
+44 (0) 1992 650486
Fax:
+44 (0) 1992 652226
[email protected]
www.drucegrove.com
Rope Tensioning System
Equator
®
Equator
®
Move the pointer towards the bottom of the scale
(A) and push the spring assembly fully into the
body (B).
Check that the pointer lever is correctly located into
the pointer lever peg attached to the adjustable
hook bolt, by attempting to move the pointer
towards the top end of its scale (C).
This should not be possible when the lever is
correctly located. Repeat the procedure if necessary.
Ensure that the hook bolt has the open end facing
outwards and refit end cap.
Remove the rope locator by pulling it downwards.
Refit correct rope locator.
Check that the end caps are correctly fitted by
pushing firmly in the upward direction.
Repeat the procedure on the second gauge.
THE TWO EQUATOR ROPE TENSION GUAGES
ARE NOW READY FOR USE.
6
7
8
9
10
B
C
A
