Dik Geurts
15
3.
SAFETY
3.1
GENERAL
Caution
Carefully read this chapter on safety, before you start performing
installation or maintenance work;
Please observe the general regulations and the precautions/safety
instructions in this manual.
3.2
REGULATIONS
Please install the appliance in accordance with the applicable European, national, local and
constructional (installation) regulations. In the Netherlands, the Building Regulations applies.
3.3
PRECAUTIONS / SAFETY INSTRUCTIONS DURING INSTALLATION
Carefully observe the following precautions/safety regulations:
•
You should only install and maintain the fire if you are a competent and recognized wood
burning appliances installer;
•
Suspend the fire from a wall with sufficient load bearing strength;
•
Suspend the fire and/or place the flue pipes in front of a wall made of noncombustible
material;
•
If you discover flammable materials apply sufficient heat resistant isolation material;
•
Always place the fire and/or the flue pipes at a minimum distance of 700 mm from
combustible objects and/or materials;
•
Mount the fire on top of a protective floor plate, in case of a combustible floor. The floor
plate made of noncombustible material should extend at least 300 mm at the front of the
fire, and it should be at least 300mm wider than the fire;
•
Connect the fire to a suitable flue duct;
•
Have the flue duct inspected and cleaned in advance, by a certified chimney sweeping
company;
•
Do not make any changes to the fire yourself; only replace parts by original parts;
•
Make sure there is sufficient ventilation in the room where the fire is installed.
4.
REMOVING THE PACKAGING
Note the following items when removing the packaging:
•
check the appliance for transportation damage, neever install a damaged fire;
•
check if the box with parts is complete.
In appendix 1 /
table 1
you can see which parts you should have after removing the packaging;
•
as some parts may have shifted in transit, check the position of the baffle plate and the
vermiculite plates.
•
check the operation of the air slide, door closure and, if applicable, the rotation
mechanism;
•
if necessary, contact your supplier;
•
dispose of packaging in accordance with local regulations.
Содержание YUNA
