Dru 0063CT3681, Руководство по установке

Страница: 37 / 48

9.3 Connection extra power supply (max. 80W, 230VAC)
(if applicable)
This connection is ideal for possible lighting or a ventilation system in the chimney breast and can be operated by means
of the remote control (see Fig. 9-2 (C)). The power supply of this connection is identical to the mains voltage and it can be
subjected to a maximum load of 80 Watts.
9.4 Remote controls
9.4.1 Black remote control for the user
Proceed as follows to make the black remote control ready for use:
1
Place the two penlite batteries (AA) in the battery holder of the remote control.
1
Make sure the voltage of the appliance is not switched off for longer than 5 minutes.
1
If the remote control is not on 'BND', you must proceed as follows:
1
Press the 'menu' button (button with square symbol) on the remote control for at least 10 seconds and then press a few
times until 'BND' appears on the screen with the receiving symbol.
1
Press the 'arrow up' and 'arrow down' buttons briefly and simultaneously, so that a (flashing) warning triangle and an
hourglass appear in the screen as well.
1
As soon as logging on is finished, the start screen will appear
2
All functions are extensively explained in the supplied user manual.
9.4.2 Orange remote control for the installer
By means of the optionally available orange remote control, it is possible to read all information stored in the receiver. In
this way, the last 20 error messages can be retrieved, and it will also be possible to read how many times an error
occurred. Moreover, this remote control can also be used to adjust the basic settings and to read the magnitude of the
ionization current. This remote control is also necessary for a wired home automation control.
9.5 Alternative operation
(if applicable)
In addition to the remote control, it is also possible to operate the appliance via an external source. For this purpose, a
home automation system can be connected to the receiver. This can be both wired and wireless (see sections 9.5.1. and
9.5.2).
I nst allation manual
3 7