Dru 0063CT3681, Руководство по установке

Страница: 24 / 48

I nst allation manual
2 4
7.4 Connecting the appliance control
The appliance control is placed in such a way that all components and all adjustment, measurement and control facilities
are within reach and the components are working optimally (see fig. 7-4).
1
Press the bottom right lip upwards to unlock the door panel and keep the lip pressed upwards (1).
1
Open the door panel (2).
1
Connect the gas pipe with gas tap (3) (also see section 6.3). The gas pipe can enter the appliance from the back, remove
the press-out elements for this purpose. The gas pipe can also enter the appliance from the bottom side, from the space
under the floor with a terminal.
1
De-aerate the gas pipe on the gas control (4).
1
Connect the 230V mains voltage with protective earth using the correct type of plug. The other side of the power cord
can be simply connected with the universal 230V plug behind the door panel at the appliance control. Use this universal
230V plug to disconnect the appliance from voltage, if necessary.
3
If a 230V power cord is damaged, it should be replaced by a similar power cord or a power cord that is available from
your dealer.
1
Close the door panel, it is locked automatically (6).
3
Always close the door panel, because of the electricity connection behind the hatch (230V).
3 4
5 6
2 1
38C-2602
7-4