7
10. INSTRUCTIONS FOR USE
10.1 START UP
Damage to the power supply cable and housing can lead to contact with high voltage parts and present a danger to life:
•
Check the integrity of the power supply cable and the unit prior to use.
•
Where the cable or the unit is damaged do not operate the equipment!
•
Replace the power supply cable with a new one.
•
The unit should be opened and repaired ONLY by qualified personnel.
•
The pump MUST NOT be submersed in fluids or utilised in environments which are particularly aggressive or
explosive/inflammable if not prepared for this purpose beforehand by the supplier.
•
For correct fixing verify the distance between centres.
•
Use gloves and safety glasses as required in the lubrication oil safety chart.
•
DO NOT use aggressive lubricants with NBR gaskets and seals; if in doubt consult the Engineering Department of
Dropsa SpA, who will provide a chart with the details of recommended oils.
•
DO NOT ignore dangers to health and observe all hygiene standards.
10.2 ACTION TO BE TAKEN PRIOR TO START UP
•
Verify the integrity of the pump;
•
Fill the reservoir with suitable lubricant (min/max indication on the reservoir);
•
Ensure the pump is at working temperature and the tubing is free of air pockets;
•
Ensure that any electrical connections have been effected correctly (CEI 64/8, IEC 364);
10.3 REGULATION
The only parameter which can be modified is the flow rate; turn adjustment knob clockwise (decrease) or unclockwise
(increase).
FLOW RATE ADJUSTMENT
FOR 1 CC PUMP
FOR 5 CC PUMP
