Ignis Operations Manual
Drone Amplified
Maximum Flight Radius:
Allows you to adjust the drone’s maximum allowed distance from
home. Move the slider all the way to the right to disable this.
Low Battery Warning Threshold:
Sets the battery percentage that will make the controller
start beeping. This doesn’t affect the low battery procedure.
Critical Battery Warning Threshold:
Sets the battery percentage that will make the
controller start beeping rapidly. This doesn’t affect the low battery procedure.
Low Battery Procedure:
Sets the procedure the drone will follow when it gets low on
battery. You can choose between “Land in place with a 10% battery buffer”, or “Go home
and land with a 10% battery buffer”. If “Go home” is the selected procedure, and the
drone reaches a point where it determines it only has enough battery to return home and
land with a 10 % battery procedure, a prompt will appear in the app asking you to either
confirm or cancel the drone’s request to go home. If you take no action within 10
seconds, then the drone will automatically return home. The app may also ask you to
confirm the automatic landing. Note that if the drone is already within 20 meters of the
home point, it will land in place instead of going directly over the home point. See the
RTH Safety Notices in your drone’s manual for other considerations.
Lost Link Procedure:
Sets the procedure the drone will follow if it loses connection with
the remote controller. You can choose between “Hover”, “Land”, or “Go Home”. See the
RTH Safety Notices in your drone’s manual.
Minimum Go Home Altitude:
If the drone is below this altitude when the Go Home
procedure is initiated, it will first ascend to this altitude before returning home.
Video Feed Configuration:
This setting is only available on the Matrice 600, and gives you
4 options to quickly configure which video feed gets streamed from the Lightbridge 2.
You can select between “Zenmuse”, “HDMI”, “AV”, and “HDMI & AV”. Configuring the
video feed on the Matrice 600 is quite buggy. If this quick configuration doesn’t work,
you can try the advanced controls, which are enabled by the checkbox at the bottom that
says “Show advanced controls”.
Primary Video Feed Source and Bitrate:
This is part of the advanced video feed con-
figuration controls. This shows what source the primary video feed will display, as well
as how many kilobytes per second are currently being received from this video feed.
Secondary Video Feed Source and Bitrate:
This is part of the advanced video feed con-
figuration controls. This shows what source the secondary video feed will display, as well
as how many kilobytes per second are currently being received from this video feed.
Last Updated
Page 93
Apr 13, 2022