Ignis Operations Manual
Drone Amplified
The waypoint path will become solid instead of dashed to indicate it is being uploaded
and executed, as shown in the above figure. A status message will appear at the bottom of
the screen to describe the status of the upload. If the upload fails, you can retry the upload
by pressing the “Start” button again. Once the mission is done uploading, the drone will
begin to fly along it, and its status will change from FLYING to WAYPOINTS.
You can press the “Stop” button to stop the drone from flying the waypoint mission and
regain normal control.
You cannot modify the waypoint mission while it is uploading or executing. If you place
new waypoints, the drone will not automatically fly to them unless you stop and restart the
waypoint mission. Each waypoint will be automatically removed as the drone reaches it,
allowing you to easily resume the waypoint mission if you stop it. The drone will hover in
place once it reaches the last waypoint.
If you press the “Start” button while a waypoint mission is executing, the current
mission will be stopped, and a new one will be started.
When flying with DJI drones, there's a rare glitch that can occur in which the app thinks
the drone is on a waypoint mission, when the drone is not flying a waypoint mission. In this
case, start a new waypoint mission and then stop it to make the app realize the drone is not
flying a waypoint mission.
It’s also possible that the app could think the drone is not flying a waypoint mission
when it actually is. This could happen if the app is restarted while the drone is mid-mission.
In this case, you can still use the “Stop” button to stop the mission.
Last Updated
Page 131
Apr 13, 2022