Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
3.2 Matrice 600 Pro Preflight Inspection Checklist
1
.
Inspect Remote Controller for Visible Damage
:
None
2
.
Check Remote Controller Battery Charge Level
:
At least two solid lights
3
.
Check Tablet is Clamped Securely by the Remote Controller
:
Secure
4
.
Connect USB cable from Remote Controller to Tablet
:
Connected
5
.
Check Flight Mode Switch is set to P or F
:
P or F
Note: F mode allows for autonomous flight operations, such as following waypoints
6
.
Check Tablet for Visible Damage
:
None
7
.
Check Tablet Battery Charge Level
:
At least 25%
8
.
Check Ignis Control Bar is plugged into Remote Controller
:
Connected
9
.
Check 6 Flight Batteries for Visible Damage
:
No Damage
10
.
Check 6 Flight Batteries are of the Same Set
:
Same Set
11
.
Check 6 Flight Batteries Charge Level
:
At least three solid lights
12
.
Check 6 Flight Batteries Charge Level Similarity
:
Similar
Note: No battery should be more than one blinking light different than any other
13
.
Check Vehicle Camera for Visible Damage
:
No Damage
14
.
Check Vehicle Camera Configuration
:
Correct
15
.
Check Vehicle Camera Battery Charge Level
:
At least 25%
16
.
Check Vehicle Camera Securely Mounted to Vehicle
:
Secure
17
.
Check Vehicle Camera Connection to Vehicle
:
Connected
18
.
Carry Vehicle to Takeoff Point
:
Done
19
.
Face Vehicle away from Piloting Position
:
Done
20
.
Clear Takeoff Point of Obstacles in 10 foot Radius
:
Clear
21
.
Clear Takeoff Point of Bystanders in 20 foot Radius
:
Clear
22
.
Raise GPS
:
Done
23
.
Raise and Lock Arms
:
Done
24
.
Remove and Store Propeller Covers
:
Done
25
.
Expand Propellers
:
Done
26
.
Insert Batteries
:
Done
27
.
Check Propellers for Damage
:
None
Note: Run your fingers along the blades to feel for nicks, cracks, and flexing
28
.
Check Arms are Locked
:
Locked
29
.
Check Arms for Visible Damage
:
None
30
.
Check 6 Flight Batteries are Fully Inserted
:
Secure
31
.
Check GPS are Fully Raised
:
Raised
Last Updated March 12, 2020
Page 24
