
Spark Installation and Operation Manual
52
The blower has a rheostat, see the illustration on the right to
identify the different adjustment positions; either from high (HI)
to low (LO) or closed (OFF).
When using the optional blower, allow the stove to reach operating temperature
(approximately one hour), before turning it on. The increased airflow from the blower cools
the firebox and could affect the start-up combustion efficiency if the blower is turned on too
early. You can also install a thermodisc to enable the blower to start or stop automatically
when the stove is hot or too cold. The thermodisc part number is AC05530 for a basic
model and AC02055 for a quick connect model. Installation instructions are supplied with
the blower and the thermodisc.
CAUTION: ENSURE THAT THE BLOWER’S POWER CORD IS NOT IN CONTACT
WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE
DAMAGE. DO NOT RUN THE POWER CORD BENEATH THE STOVE.
Содержание Spark DB03400
