Drolet ElDorado Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 54

Drolet ElDorado Скачать руководство пользователя страница 47

Savannah Installation and Operation Manual

47

Appendix 3: Installation and Use of Air Circulation Fan, and

Optional Thermodisc

A fan is installed on the back of the stove to increase the flow  of air past heat exchange
surfaces  and  to  help  circulate  warm  air  in  the  room.  When  used  regularly,  the  fan  can
provide  a small increase in  efficiency, up to  2 percent. However, the  use  of a fan should
not be used as a way to gain more output from a stove that is undersized for the space it is
intended to heat.

When  using  the  fan,  allow  the  stove  to  reach  operating  temperature  (approximately  one
hour), before turning it on. The increased airflow from the fan cools the firebox and could
affect  the  start-up  combustion  efficiency  if  the  fan  is  turned  on  too  early.  You  can  also
install  a  thermodisc  to  enable  the  blower  to  start  or  stop  automatically  when  the  stove  is
hot or too cold. The thermodisc part number is AC05530 for a basic model and ACO2055
for  a  quick  connect  model.  Installation  instructions  are  supplied  with  the  blower  and  the
thermodisc.

«
...
45
46
47
48
49
...
»

Содержание ElDorado























































Отзывы:

Нет отзывов