Drolet ElDorado Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 54

Drolet ElDorado Скачать руководство пользователя страница 28

Savannah Installation and Operation Manual

28

6.2 Regulations Covering Stove Installation

When installed and operated as described in these instructions, the Savannah wood stove
is suitable for use as a freestanding heater in residential installations. The Savannah wood
stove is not intended for installation in a sleeping room of a mobile home.

In  Canada,  the  CSA  B365  Installation  Code  for  Solid  Fuel  Burning  Appliances  and
Equipment and the CSA C22.1 Canadian National Electrical Code are to be followed in the
absence  of  local  code  requirements.  In  the  USA,  the  ANSI  NFPA  211  Standard  for
Chimneys,  Fireplaces,  Vents  and  Solid  Fuel-Burning  Appliances  and  the  ANSI  NFPA  70
National Electrical Code are to be followed in the absence of local code requirements.

This stove must be connected to a chimney complying with the requirements for Type HT
chimneys in the Standard for Factory-Built Chimneys for Residential Type and Building
Heating Appliances, UL 103 HT and ULC S629 or to a code-approved masonry chimney
with a flue liner.

«
...
26
27
28
29
30
...
»

Содержание ElDorado























































Отзывы:

Нет отзывов