Tundra II Furnace Installation and Operation Manual
35
Appendix 1: Optional thermostat installation
Using a thermostat will help you maintain a constant temperature throughout the house. A
fixed wall mounted 24v thermostat is required.
Note: Thermostat manufacturer’s instruction always overrides the information
published in the following section.
Thermostat location
- Must be installed on an inside wall of the
house;
- Where it will be the least affected by
affected by air currents from a hot air outlet
or cold outside walls;
- Must be installed at a minimum of 55" (140
cm) above the floor;
- Must be installed at a minimum of 15’ (4.57
m) from the furnace and must not receive
radiation from the glass door.
Thermostat wiring
Before
installing
the
thermostat,
disconnect the furnace from the outlet.
Use an 18 AWG 2 strand wire.
The terminal is located at the back on the
rear right side of the furnace when facing
it. It is marked with the letter “T”.
Loosen the two screws in the middle of the
terminal bloc and insert the wires in the
terminals. Tighten the two screws.
Open the thermostat housing and connect
the wires following the manufacturer's
instructions.
Содержание DF02001
