Drivecon PWR MICRO PWRM212D, Руководство пользователя

Страница: 27 / 44

normal, not interlocked
toggle (on/off)
off (on is button “UP”)
normal, interlocked with button “UP”
normal, not interlocked
toggle (on/off)
off (on is button “EAST”)
normal, interlocked with button “EAST”
normal, not interlocked
toggle (on/off)
on (off is button “DOWN”)
normal, interlocked with button “DOWN”
normal, not interlocked
toggle (on/off)
on (off is button “WEST”)
normal, interlocked with button “WEST”
toggle (on/off) of Relay R0
inching .1 seconds
inching .2 seconds
inching .3 seconds
inching .4 seconds
inching .6 seconds
inching .7 seconds
inching .8 seconds
inching .9 seconds
inching .5 seconds
.5 seconds
1 second
1.5 seconds
2 seconds
3 seconds
4 seconds
Acceleration delay for all button relays.
Default setting of ZERO seconds
PWRM214D
PWRM214D Wire Diagram
0.5A
10A
( BLACK ) POWER 1
( ORANGE) COM
( RED ) MAIN
( YELLOW ) UP
( GREEN ) DOWN
( GREY ) U/D 2S
( BLUE ) EAST
( PURPLE ) WEST
( WHITE ) E/W 2S
( PINK ) R0
( BROWN ) POWER 2
110VAC Standard
Start key second function setting
Default setting normal momentary control of R0
10 minutes
20 minutes
30 minutes
1 hour
2 hours
3 hours
4 hours
Auto Shut Down time
Default setting : Never
NOTES: For each button there is a default function setting labeled in bold, if you wish to change any button function check the appropriate circle for that button.
If you want to re-label any button, fill in the squares in the appropriate section. Use only the squares available.