Drive Trekker TK 1000, Руководство пользователя

Страница: 4 / 6

Ankle Prompts
Item #s TK 1060 S, TK 1060 M & TK 1060 L
Install the ankle prompts by inserting the end of rod into
caster slot, then pull back white trigger (O) and insert
into opposite caster slot. To adjust the stride of the user,
press and slide the spring clips (P) to appropriate length.
To adjust the size of ankle straps use buckle adjuster (Q).
P P
O
Q
Hip Positioner & Pad
Item #s TK 1070 S & TK 1070
Install mounting bracket and handgrips at the back of the
handlebar. Attach the front of the hip positioner towards
the front of the handlebar using buckles (R). Attach the
rear of the hip positioner towards the rear of the handle-
bar by either attaching rings (S) to handgrips or remove
clamp and handgrips and loop straps over rear of handle-
bar. Adjust loop with buckles.
R
T
S
S
U
U
Hip positioner adjustments
Height
- rear of the hip positioner - Push in button (T)
and slide handgrip to desired position. Release button
and move handgrip until it clicks into place.
Height – hip positioner – Raise or lower hip positioner by
adjusting the length of the two front and two rear straps.
Depth - Reposition mounting bracket on handlebar.
The hip positioner can be used with or without the pad.
To attach the hip pad, push the rear straps (U) of the hip
positioner through the holes at the back of the pad and
pull into place. Securely snap front and side flaps around
the hip positioner.
REAR
FRONT
T