1. Install the brake handles
3. Install the shopping bag
2. Install the backstrap
OPERATING MANUAL
Slide the basket hooks into the brackets located under
the seat at the front.
ASSEMBLY
a) Consult your doctor, therapist or other qualified
professional to determine if this Rollator RA60 will
suit your particular needs.
b) For proper positioning and use of your Rollator, imagine a
line drawn across the back of the Rear Wheels. Part of one
foot should always be slightly ahead of that line as you walk
c) This rollator is for individual use only.
d) Rollator is designed for indoor & outdoor use.
e) Regularly check the brakes for proper operation. Pulling up
on the brake handle will slow the rollator. Pushing down
on the brake handle will lock the wheels. Pull up on the
brake handle to release the brake lock.
(refer “BRAKE
USAGE” on page 2)
f) Do NOT use as a wheelchair or transport chair.
g) Rollator must be fully opened and locked position
when being used as a walking aid.
h) Wear a proper shoes while using this rollator
i) Follow the instruction
"OPENING/FOLDING"
to fold or
unfold the rollator
(refer page 2).
j) Do NOT sit on rollator and push yourself around using
your feet to propel.
k) Do NOT stand on Seat .
l) Before sitting on seat, be sure the rollator is fully
opened, and the brake is in the locked position.
m) Do NOT use on stairs or escalators.
n) Do NOT seat on the rollator if the ground is slopped
or uneven.
o) Exercise caution when walking on sloped surfaces.
p) Do not hang objects from the backstrap.
q) Do not use if the rollator is not functioning properly.
r) Maximum user weight 250lbs / 113kg .
s) When storing/transporting your rollator do not
anything on the rollator, as damage may occur.
t) Make sure your finger are clear of the folding or
pinch point, whenever the product is fold or unfolded.
ATTENTION!
Ensure that all bolts are securely fastened before using this rollator!
Brakes must be in the parked /locked position before sitting on the rollator!
SAFETY NOTICE & CAUTION
RA60
Loop the strap (velcro)
around the frame and
insert into wire tab
Firmly stick the strap
CAUTION: DO NOT OVERLOAD
SHOPPING BAG MAX LOAD 11lbs/5kg
Slide backstrap into the
backrest connector. The
padded side of the backstrap
should face the inside of the
rollator.
Secure the backstrap into
position by tightening the
screw and nut.
Rollator should be in the unfolded
position before beginning.
Holding the
‘RED’ release lever in the open position.
Slide the Brake handle into the frame.
Rectangular slots on the brake handle tube
should be facing inwards.
Set the desired handle height, and close
the ‘RED’ release lever. The release lever
should ‘click’ when locked into the closed
position.
The consequences such an adjustment may
have on the stability.
