Drive Medquip MQ5800, Инструкция по эксплуатации

Страница: 11 / 33

English 9
7. Attach one end of the air tubing to the air tubing connector
located on the front of the compressor.
8. Attach the other end of the air tubing to the base of the neb-
ulizer.
! WARNING
In the case of high humidity, condensation may form inside
the internal tubing. Run the unit for two minutes before con-
necting the nebulizer to the tubing.
9. Attach the mouthpiece to the top section of the nebulizer.
NOTE: Before starting a cold unit, let the unit reach room tempera-
ture in a heated area.
10. With the power switch off, plug the power cord into an appropri-
ate electrical outlet.
CAUTION
DO NOT add over 8ml of medication to the medication
cup. The maximum capacity of the nebulizer medication
cup is 8ml.
5. Add the prescribed amount of medication to the cup of the
nebulizer using an eyedropper, pre-measured dose or ampoule
(Figure 2.1).
6. Gently twist the top and bottom sections together to assem-
ble the nebulizer. Be sure the two sections fit securely.