DRIVE SOLUTIONS TRASCO GRB Series Скачать руководство пользователя | Manualshive

Страница: 13 / 31

background image

www.sitspa.com

TRASCO

®

- User and Maintenance Manual

114.02 - Rev. 2 - 2

nd

March 2020

Approved by: SIT S.p.A.

13

2.1.6 Hubs machining

Any machining of the hubs must not compromise its functionality.
As for the maximum diameter of the bore that can be achieved, please refer to the table in the catalogue.
The bore machining must be carried out in accordance with the concentricity values with the outer diameter and the perpendicularity
values between the hole and the flat internal surface of the hub with a degree of tolerance IT8.

It is important not to exceed, for all the materials of which the hub is composed, the maximum value of the hole provided by SIT and
reported in the technical catalogue; if this value is not respected the coupling may break, causing serious dangers during the rotation.

Figure 2-6 - Processing tolerance

STOP

DANGER!

The maximum bore allowed and indicated in the catalogue table must not

be exceeded. Higher values could cause breakage and danger around

the machine.

If the hub bore is machined by the customer, the concentricity and radial

oscillation values specified by SIT must be respected.

Carefully align the hubs when machining the finished bore.

CAUTION!

The customer is responsible for all the machining performed.

SIT assumes no liability arising from incorrect machining or for failure

to observe the instructions contained in this manual and in the technical

catalogue.

PRECAUTION!

Except for the machining of the hole, the seat of the keyway and the

threaded bore for the setscrew in accordance with the values shown in

the technical catalogue, any machining of couplings that must be used in

hazardous areas must obtain the express permission of SIT.

The customer must provide SIT with a technical drawing which shows the

machining to be carried out. It is the responsibility of SIT to evaluate and

approve it.

Any spare parts for these couplings must be standard hubs unbored or

with pilot bore marked with the ATEX marking.

«
...
11
12
13
14
15
...
»

Содержание TRASCO GRB Series
































Отзывы:

Нет отзывов

Похожие инструкции для TRASCO GRB Series

Бренд: Harken Страницы: 4

Бренд: Rangevision Страницы: 28

Бренд: Fayat Group Страницы: 50

Бренд: Halyard Страницы: 88

Бренд: Garmin Страницы: 12

Бренд: Garmin Страницы: 13

Бренд: M-system Страницы: 3

Бренд: M-system Страницы: 5

Бренд: MA Страницы: 2

Бренд: Madsen Страницы: 206

Бренд: Raven Страницы: 48

Бренд: Pacific Страницы: 16

Бренд: Igema Страницы: 22

Бренд: MAGSTIM Страницы: 86

Бренд: RAMVAC Страницы: 53

Бренд: Agilent Technologies Страницы: 114

Бренд: Phenix Technologies Страницы: 39

Бренд: Triton Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды