17
16
8. Relaxation Time Control
This dial determines the time of relaxation. The stimulation ceases at setting
relaxation time and then re-start in a cycle pattern. The relaxation time of both
channels is changed by turning this dial. The range of it is adjustable from 1
second to 45 seconds.
9. Ramp Time Control
This dial controls the time intensity of current output that increases from 0 to
the setting level. When the ramp time is set, each contraction may be ramped
in order that signals come on gradually and smoothly. The ramp time is adjust-
able from 1 to 8 seconds by turning this switch.
10. Check/Replace the Battery:
Over time, in order to ensure the functional safety of EMS,
changing the battery is necessary.
1. Make sure that both intensity controls are switched to off-
position.
5. Pulse Rate Control:
This dial determines how many electrical impulses are applied through the skin
each second. By turning these controls, the number of current impulses per
second (Hz) for both channels can be continually adjusted. Unless otherwise
instructed, turn the pulse rate control to the 70-120 Hz range.
6. Pulse Width Control:
This dial adjusts the length of time. Each electrical signal is applied through the
skin, which controls the strength and sensation of the stimulation. There are 3
Pulse Widths of options 100, 200 and 300 uS, Push the dial until the desired
position is reached.
7. Contraction Time Control
The contraction time control adjusts the time of stimulation. By turning this
control, the contraction time can be pre-set. The range is adjustable from 1
second to 30 seconds. The contraction time of EMS device can be adjusted by
turning this dial.
PDF created with FinePrint pdfFactory trial version
