Instructions for use DUO MOTION XL / 24 XL
11
Drive Medical GmbH & Co. KG | As per: 09.07.2020 | Errors and alterations excepted
EN
Indication
INDICATION:
Significant to full impairment of mobility/walking/transfer
in the case of structural and/or functional damage to the
lower extremities (including amputation, after-effects of
injuries, musculoskeletal/neuromusculoskeletal move-
ment disorders) and Inability to move a wheelchair (for
example, in the case of limited strength and grip function
or a lack of coordination ability of the arms/hands).
For use of the toilet and shower (the shower must be de-
signed such that it can accommodate a shower wheel-
chair).
Scope of delivery
1 x
Base frame
1 x
Back unit
4 x
5“ wheel (only at 530500500)
2 x
5“ wheel (only at 530500400)
1 x
Seat
1 x
Hygiene cover
2 x
Star screw
1 x
Toilet bucket with cover
2 x
Footrests
2 x
24“ wheel (only at 530500400)
1 x
Tools
1 x
Instructions for use
Safety instructions
• Read these instructions for use carefully.
• All components should be checked for damage and a
secure fit prior to use.
• Approved for indoor use only.
• Clothing or body parts can be pinched when sitting
down, standing up, inserting the toilet bucket, as well as
when raising the armrests and locking them into place.
• If you need to move over thresholds, do so slowly and
carefully, otherwise the wheels can become damaged!
• When using a wheeled commode, always use the park-
ing brakes.
• During transfer into/out of the wheeled commode, the
footrests must be swiveled out of the way.
• Never use the footrests as assistance when getting up
– risk of tipping!
• Prevent unauthorized use, for example, by children.
• Take note of the permitted maximum weight of the user.
This information can be found in the technical data in
these instructions for use as well as on the identification
plate. nbereich zugelassen.
Assembly
Insert the four 5“ wheels into the mounting tube on the
frame in the desired position and secure the wheels with
the pin clips provided (pic. 1-2).
2
1
Place the preassembled back unit on the base frame and
secure it by turning the star screws clockwise (pic. 3).
3
Clip the seat section to the frame (pic. 4).
4
Put the backrest cover
over the armrests and
close it as shown. Push
the bucket from the rear
into the guide rail under-
neath the seat section; to
remove after use, pull out
backwards (pic. 5).
5
