DriSteem Ultra-sorb XV, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 40

1
ULTRA-SORB MODEL XV INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
Mechanical specifi cations
OM-7483
mc_101410_0755
Top view
Elevation view
Blank
side view
Header
Connections
side view
A
A’
B’
C
D
B
F
E
G
H J
K
L
Table 1-1:
Ultra-sorb Model XV dimensions
Dimension Inches (mm)
A Unit width
15" (380 mm) min,
147" (3735 mm) max,
in 1" (25 mm) increments
A' Face width
12" (305 mm) min,
144" (3660 mm) max,
in 1" (25 mm) increments
B Unit height*
21.75" (550 mm) min,
153.75" (3905 mm) max,
in 1" (25 mm) increments
B' Face height
12" (305 mm) min,
144" (3660 mm) max,
in 1" (25 mm) increments
C Frame depth 7.2" (183 mm)
D Frame enclosure 3.9" (99 mm)
E Header enclosure 5.85" (149 mm)
F Mounting fl ange 1.5" (38 mm)
G Humidifi cation steam inlet
(internal thread)
• 1" or 2" NPT (DN25 or DN50),
determined by maximum steam
capacity
• 3" (DN80) fl ange, for humidifi cation
steam from STS humidifi er only
H Pressurized steam inlet
(internal thread)
3/4" NPT (DN20)
J Float switch or
optional header overfl ow/
access port (internal thread)
1/2" NPT (DN15)
K Pressurized condensate
outlet (internal thread)
3/4" NPT (DN20)
L Overall width
• 1" (DN25) connection, same as
dimension A;
• 2" (DN50) connection, dimension A
+ 1" (dimension A + 25 mm)
• 3" (DN80) fl ange, dimension A +
6.5" (dimension A + 165 mm)
Control cabinet See Page 17.
* Panels with unit height more than 120" (3048 mm) have two-piece
side fl anges and are shipped with brackets for easy fi eld assembly.
Panels with unit height more than 98" (2490 mm) are shipped
unassembled.
Table 1-2:
Ultra-sorb Model XV tube steam capacity*
Diameter lbs/hr kg/h
1.5" 43 19.5
2.0" 80 36.3
* Consult DriSteem if face height is less than 17" (432 mm) for 1.5"
tubes or less than 24" (610 mm) for 2.0" tubes.
FIGURE 1-1: ULTRA-SORB MODEL XV DIMENSIONS
MECHANICAL SPECIFICATIONS