DriSteem Humidistat TRI2, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 24

Table 8-1:
Model TCI and TRI2 specifications (continued)
Model TCI Model TRI2
Standards
conformity, EMC standard, low voltage
directive
2014/30/EU
2014/35/EU
Automatic electrical controls for household
and similar use
EN 60730-1
Special requirement on temperature
dependent controls
EN 60730-2-9 -
Electromagnetic compatibility for industrial
and domestic sector
-
Emissions: EN 60 730-1
Immunity: EN 60 730-1
Degree of protection IP30 to EN 60529
Pollution class II (EN 60730-1)
Safety class III (IEC60536) II (IEC60536)
Overvoltage category I (EN60730-1) II (EN60536)
General
Material: Cover, back part, mounting plate Fire proof ABS plastic (UL94 class V-0) Galvanized steel
Dimensions (H x W x D)
Front part: 15 X 113 X 72 mm (0.6 X
4.5 X 2.8in)
Power case: 58 x 32 mm (2.3" x 1.3")
Front part: 14 X 113 X 72 mm (0.6 X 4.5
X 2.8in)
Power case: 50 x 50 mm (2.0" x 2.0")
RoHS compliant according to 2011/65/EU
Weight (including package) 253 g (8.9 oz) 184 g (6.5 oz)
Network
Hardware interface - RS485 in accordance with EIA/TIA 485
Max nodes per network - 128
Max nodes per segment - 64
Conductors - Shield twisted pair (STP) cable
Impedance - 100 - 130 ohm
Nominal capacitance - 100 pF/m 16 pF/ft. or lower
Galvanic isolation - The communication circuitry is isolated
Line termination -
A line termination resistance (120 ohm)
shall be connected between the terminals
(+) and (-) of the furthermost node of the
network
Network topology -
Daisy chain according EIA/TIA 485
specifications
Recommended maximum length per chain - 1200 m (4000 ft).
BACnet
Communication standard -
BACnet MS/TP over RS485 BTL
tested and listed B-ASC
Communication speed -
9600, 19200, 38400, 57600, 76900,
115200
SPECIFICATIONS
Model TCI and TRI2 specifications (continued)
8
DRISTEEM TCI AND TRI2 HUMIDISTAT INSTALLATION, OPERATION, AND MAINTENANCE MANUAL