www.petsafe.net
9
8
www.petsafe.net
EN
ES
FR
IT
NL
DE
Pet Fountain Disassembly & Cleaning
Important:
Pet Fountain must be cleaned to continue working normally.
CHARCOAL FILTER:
The Charcoal Filter should be changed every two to four weeks.
1. Replace Charcoal Filter more frequently when using the Pet Fountain for multiple pets
or pets that produce a lot of saliva.
2. The Charcoal Filter is an added feature of the Pet Fountain. The use of a filter is
not required for normal operation, but using a filter will keep the Pet Fountain
water cleaner.
3. The Charcoal Filter may be rinsed out when the Pet Fountain is cleaned. Do not wash
with soapy water, as you will not be able to remove the soap residue.
• Never wash the filters with soapy water, as the soap residue will
seep into the filters and cannot be removed. Only rinse the filters
with water.
• Use only PetSafe
®
brand authorised replacement filters. If
unauthorised filters are used it may void the warranty.
PET FOUNTAIN:
Clean the Pet Fountain once a week.
1. Unplug the Pet Fountain and disconnect the In-Line Plug.
2. Remove Housing lid and the Charcoal Filter.
3. Empty the water out of the Pet Fountain.
4. Remove the Pre-Filter by gently pulling up on the top lip of the
Pre-Filter and wash with soap and water (
Fig. 3
).
5. Remove the Housing by gently pushing in on either side of the
Pet Fountain where the curve meets the seam. Gently lift up
(
Fig. 4 & 5
). You will notice the right side of the Housing will
offer some resistance as the water Intake Tube pulls away
from the Pump.
6. Remove the Pump from its cavity by placing your index finger behind Pump and
gripping the bottom with your thumb (
Fig. 6
).
Fig. 3
Fig. 5
Fig. 4
Fig. 6
Pump
.