7
/
/
/
/
/
/
/
/
buttons, going from
“1”: min. level, to “9”: max. level.
Specifically function
Select the cooking zone you wish, and press the same number level button twice; the point
corresponding display shows . The cooking zone will work high level . Push the number level again,
Then the cooking zone will recover to previous level.
Deactivation of cooking zones
Select the cooking zone you wish to switch off. Press the corresponding button.
Press the key “
” to set the level to “0”. The cooking zone switches off and the residual heat indicator “H”
lights up.
Child lock
This function locks the controls to prevent accidental switching on of the hob. To activate the
child lock function, switch on the hob and hold button
for three seconds; the timer shows Lo.
Then the control panel is locked.
To deactivate the control panel lock, repeat the activation procedure. The Lo goes off and the hob is active
again.
Timer
The timer can be used to set cooking time for a maximum of 99 minutes (1 hour and 39 minutes)
for all cooking zones.
Select the cooking zone to be used with the timer, press the button with the
clock symbol
then set the desired cooking time using the
/
/
/
/
/
/
/
/
buttons of the timer function (see figure). After a few seconds, the timer begins the countdown. Once the set
time has elapsed, an acoustic signal sounds and the hob switches off automatically.
To deactivate the timer, press the “
” button to set the display showing “00” or hold the button with the
clock symbol for at least 4 seconds.
Auto switch off
The hob will automatically switch off in 120 minutes when you did not set cooking time, forgot to switch off
the hob, and did not operate the hob at all. The relationship between the power level and default switch off
time is shown in below figure.
CONTROL PANEL WARNINGS
Residual heat indicator
The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user
when cooking zones are still hot.
If the display shows
, the cooking zone is still hot. If the residual heat indicator of a given cooking zone is
lit, that zone can be used, for example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator
– Error code “E0”
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for
your induction hob, the symbol
”E0” mean “no pot” will appear in the display (see figure at side). If
no pot is detected within 180 seconds, the hob switches off.
