|
7
■
Choose a location for your series
500 that is away from direct
sunlight, excessive heat and/or
cold, and wetness.
■
Make sure there is at least 3” of
space behind the unit to allow for
proper fan function.
■
Be sure there is an electrical outlet
close by that has the correct power
voltage.
■
DO NOT use tubing with less than a
180 PSI rating.
■
DO NOT connect copper tubing to
the elbow fitting, shutoff valve, or
directly to the Series 500. If copper
tubing is used it may result in a
serious leak. If building code or
regulations require copper tubing,
contact Drinkpod Technical Support
for specific instructions and
recommendations for adapter
fittings.
■
Make sure there are no sharp bends
or kinks in the tubing. Allow extra
tubing to prevent stress on the
fittings. Avoid tubing contact with
other objects and sharp edges.
■
All tubing used in the elbow fitting
and shutoff valve must be clean, cut
square with a sharp knife or razor,
and free of nicks and burrs.
■
If you need additional tubing, make
sure it is ¼ inch OD and meets
ANSI/NSF and FDA standards for
drinking water.
DO NOT use tubing of an unknown
quality or origin.
installation notes
WARNING:
Risk of electric shock and damage to interior walls or
leak and/or flood if improperly installed. Use the following
guidelines to help you ensure quick, easy and proper installation
of your Series 500.
