Drinkpod 100 Series, Руководство по установке

Страница: 43 / 64

Installing Your 100 Series
Installing Your 100 Series
2-41
Diagram 2.6.5-B - Merging Connections to Brass Compression Tee For Parallel Configuration
Final Check
4. Your accessory appliances should be connected to
E
1/4 in. Brass Compression Tee , and there should be a section of
A
1/4 in. White PP Tubing running from there to where your 100 Series will be located,
with
C
1/4 in. Quick Connect Shutoff Valve attached to the other end.
acc.
P
Also, for Parallel Configuration , the section of
A
1/4 in. White PP Tubing
running from your Water Source should have the
Quick Connect Shutoff Valve
removed from it, and be connected to the top port of the Brass Compression Tee .
If all of the above is correct, you’re ready to proceed to the next stage,
“Connecting
100 Series” on page 2-43 . If not, review the instructions and make any necessary
corrections before proceeding. For ‘visual’ users, we’ve provided simplified reference
diagrams to double check your work.