SKU 67042
For technical questions, please call 1-800-444-3353.
Page 5
form for the tool, and is required for
stable, controlled operation.
do not use a normal drill bit in this
6.
cutout tool.
Only cutout tool bits
designed specifically for sideways
cutting should be used.
Bit is extremely hot after use.
7.
Al-
low bit to cool completely before
touching it.
do not start tool while bit is touch-
8.
ing workpiece.
Allow bit to come up
to full speed before contacting work
-
piece.
Maintain labels and nameplates on
9.
the tool. These carry important safety
information. If unreadable or miss-
ing, contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare
10.
to begin work before turning on the
tool.
Do not lay the tool down until it has
11.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
When using a handheld power tool,
12.
maintain a firm grip on the tool with
both hands to resist starting torque.
Do not leave the tool unattended
13.
while the battery is attached. Turn off
(0 position) the tool and disconnect
the battery before leaving.
14.
The battery charger gets
hot during use. The
charger’s heat can build
up to unsafe levels and
create a fire hazard if it does not
receive adequate ventilation, due to
an electrical fault, or if it is used in a
hot environment.
Do not place the charger on a flam
-
mable surface. Do not obstruct any
vents on the charger.
especially
avoid placing the charger on car-
pets and rugs; they are not only
flammable, but they also obstruct
vents under the charger.
Place the charger on a stable, solid,
nonflammable surface (such as a
stable metal workbench or concrete
floor) at least 1 foot away from all
flammable objects, such as drapes or
walls. Keep a fire extinguisher and a
smoke detector in the area. Fre-
quently monitor the charger and
battery while charging.
This product is not a toy. Keep it out
15.
of reach of children.
People with pacemakers should
16.
consult their physician(s) before use.
Electromagnetic fields in close prox
-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Properly maintain and inspect to
avoid electrical shock.
WARNING: Some dust created by
17.
power sanding, sawing, grinding, drill-
ing, and other construction activities,
contains chemicals known [to the
State of California] to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and ce
-
ment or other masonry products
• Arsenic and chromium from chemi
-
cally treated lumber
Your risk from these exposures var-
