SKU 67042
For technical questions, please call 1-800-444-3353.
Page 10
CirCle Cutting guide uSe:
6A.
Drill a hole where the center of the
a.
circle will be.
Ball
Knob
Circle Size
Knob
Handle
Bit
note:
Numbers shown on scale
represent hole diameter of the hole
to be cut.
Adjust the Circle Size Knob to the
b.
size desired. Tighten it in place.
Hold the Ball Knob with one hand
c.
and hold the Handle with the other
hand.
Turn the switch on (I position) and
d.
allow the tool to come up to full
speed.
Slowly insert the tip of the Circle
e.
Size Knob into the center hole drilled
previously.
Place the Base Plate flat against the
f.
work surface.
Turn the tool around slowly until it
g.
has made one full revolution.
normal uSe:
6B.
Turn the switch on (I position) and
a.
allow the tool to come up to full
speed.
Slowly insert the bit into the work
b.
surface. Place the Base Plate flat
against the work surface.
Slowly complete the cut. Allow the
c.
tool to do the work.
When finished, carefully remove the
7.
Bit from the work surface, turn off (0
position) the tool, and wait until the
Bit stops.
To prevent accidents, disconnect the
8.
battery and set the tool down away
from flammable materials after use.
After tool bit cools, clean the tool,
then store it indoors out of children’s
reach.
