Drija GALAXY 90, Руководство пользователя

Страница: 4 / 9

Manual de Usuario
EXTRACTOR DE GRASA |
GALAXY 90
3
MOUNTING
The extractor should be 75 cm above the stove. To adjust it correctly: - Draw a vertical line on
the wall to center your hood (and your fat extractor) properly on your kitchen. Make a mark on
the vertical line 75 cm above the surface of your kitchen. This vertical line and the mark at 75
cm will help you correctly position the supplied adjustment template.
MODEL WITH TEMPERED GLASS
To install on the wall each hole of 100mm 3 holes whose diameter is 8mm in a suitable place
in line with the hook of the extractor. -Insert the screws into the holes. - Fix the hook on the
wall; put the drill template on the hook. See photo 1. Add the tube to the unidirectional valve,
and put it outdoors. (See pic 2). Install two grease extractors. See photo 3A. Place the glass
according to the lead direct. Use the screws to secure the glass, when installing the glass
screws; do not force it firmly to prevent glass cracking. See photo 3B.
Drill 2 holes of 8 mm in a suitable place in line with the 2nd plate and fix, then place two
screws (loosen but not place) directly on the plate, then pull the internal fat extractor on the
second plate and tighten The two screws.
This appliance is supplied with a H05 VVF power cable with 3 0.75 mm 2 (2 phase + ground)
conductors and must be connected to the 1 230 V single-phase mains by means of a plug