background image

Manual de Usuario 

EXTRACTOR DE GRASA  | 

GALAXY 90 

 

 

 

1. SAFETY WARNINGS 

Your security is important for us. Read this information before using your Extractor. 

•  Do  not  use  gas  burners  under  the extractor  without  placing  a  skillet  over  them  (flames  will 

creep upward and may damage the appliance) 

• Frying under the extractor should be kept under constant supervision. 

• Repairs should only be performed by an authorized specialist. 

• Clean the cartridge filter regularly (about once a month) 

• The extractor is not allowed to be used on a solid fuel 

stove (wood, coal, etc.). 

2. INSTALLATION 

INSTALLATIONINSTRUCTIONS 

Read these instructions carefully before installing or 
using the Fat Extractor. 

Please make this information available to the person 
responsible for installing the Fat Extractor, as it may 
reduce installation costs. 

To avoid danger, the Fat Should Extractors hold is 
installed in accordance with these installation 
instructions. 

If you have an outside outlet: 

Your extractor can be connected via an extraction line 
(enamel, aluminum, flexible tube or non-flammable 
material with an inner diameter of 150 mm) supplied 
with the extractor. 

If you do not have an outlet to the outside: All 
appliances have the option of operating in recirculation 
(no outlet to the outside). Under these circulation 
postures, add an activated carbon filter with an odor 
trap. These filters are available from your dealer with 
the reference number indicated on the nameplate (see 
inside). 

 

Содержание GALAXY 90










Отзывы: