07-01742C F435-DV (110–230V UK)
2
Legend Brands Holdings, Ltd.
INITIAL INSTALLATIONS
HANDLE INSTALLATION
1. Remove 2 screws on top
of moulded cover (A).
2. Hinge open front cover (B).
3. Place handle in upright
position (C).
4. Secure handle with
supplied screws, Nyloc nuts
and washers (D) as shown
5. Close cover and replace 2
screws. Tighten fully with a
wrench.
DRAIN HOSE
INSTALLATION
1. After opening the housing,
place hose clamp (A) over
end of interior drain hose (B)
and thread drain hose
through hole in rear cabinet
wall.
2. Insert nipple (C) into end
of drain hose. Tighten hose
clamp (A).
3. Exterior drain hose may
now be attached to quick-
connect (D) for use.
