Drew Technologies CarDAQ-M J2534-1&2 Module, Быстрый старт

Страница: 7 / 16

7
3. Fasten the two modules together with the four full tabs and
additional screws that came with the new expansion module.
The Capabilities of J2534 and CarDAQ-M
The CarDAQ-M is the most complete J2534 pass-thru device available
today. The capabilities of CarDAQ-M are largely determined by software
the vehicle manufacturers provide. More information on specific
manufacturers can be found in the J2534 Toolbox.
Reprogramming with J2534
J2534 and federal law mandate that automakers allow shop technicians
the ability to re-flash emissions-related vehicle electronic control units,
typically engine and transmission controllers. Some automakers allow for
more modules, and some have enabled factory diagnostics. Use the J2534
Toolbox for more information on the capability provided from each
manufacturer.
J2534 ToolBox™
The J2534 ToolBox is a program created by Drew Technologies to help
distribute current information to technicians working with J2534. The
J2534 ToolBox has up-to-date information on manufacturer
reprogramming issues, links to manufacturer sites, and much more. The
J2534 Toolbox is installed from the disk that came with your CarDAQ M.
The J2534 Toolbox can also be downloaded from
www.drewtech.com/downloads .
Registering/Creating an Account
To begin using the J2534 Toolbox click on the J2534 Toolbox icon on you
desktop.
When toolbox starts up you will need login in to use all of the features
provided. If you do not have an account, click on the
button. The J2534 Toolbox requires an account to access all of the
features that make it useful to you as an information source.