Drew Technologies CarDAQ-M J2534-1&2 Module, Быстрый старт

Страница: 2 / 16

2
CarDAQ-M has been carefully designed and tested to comply with OBDII
protocols, which are used on most 1996 and newer cars and light trucks sold in
the USA. However, some vehicle models are not in full compliance with these
protocols for various reasons. In addition, the computer control systems or
sensors on any given vehicle may be malfunctioning or out of specification.
Note: Vehicles manufactured for use outside of the USA may not comply with
OBDII protocols, even though an SAE J1962 connector is located in the vehicle.
Connection to vehicles manufactured for use outside of the USA is AT YOUR
OWN RISK. Drew Technologies will not be held responsible for ANY direct,
indirect or consequential damage that arises as a result of connecting to such a
vehicle.
Before installing CarDAQ-M, we recommend visiting this website for service
information:
www.nastf.org .
While Drew Technologies testing and the experience of thousands of CarDAQ-M
users have shown the interface to be safe and reliable, there is an inherent risk in
using any product that may potentially affect the operation or drive-ability of your
vehicle. Drew Technologies will not be held responsible for ANY direct, indirect or
consequential damage that arises as a result of using CarDAQ-M on a vehicle.
If you are concerned about the operation of your vehicle at any time while using
CarDAQ-M:

If you are driving, pull off the roadway immediately or as soon as it is
safe to do so.

Disconnect CarDAQ-M from the OBDII port.

Consult a licensed mechanic or automobile service center.
Report any issues or concerns to our Technical Support Dept. at
support@drewtech.com. We are open Monday through Friday, 9:00 a.m. to 5:30
p.m. Eastern Time. We maintain an active database of the feedback we receive,
and your comments can help us continuously improve the product.