Dresser MOONEY FLOWGRID SLAM SHUT страница 20 Скачать руководство пользователя

Страница: 20 / 20

Boundless Energy

™

Warranty

LIMITED WARRANTY:

Seller warrants title and that the

goods manufactured by the Seller will be free from defects in

materials and workmanship under normal use and service until

the expiration of the earlier of twelve (12) months from the date

of initial operation or eighteen (18) months from the date of

shipment by Seller. Resale goods shall carry only the warranty

extended by the original manufacturer to the original purchaser.

If, within thirty (30) days after Buyer’s discovery of any warranty

defects, Buyer notifies Seller in writing, Seller shall, at its option,

promptly repair or replace F.O.B. point of manufacture, that

portion of the goods found by Seller to be defective. Goods

repaired and parts replaced during the original warranty period

shall be in warranty for the remainder of the original warranty

period. This warranty is the only warranty made by Seller and

can only be amended by a written instrument signed by an of-

ficer of Seller. Subject to this warranty and except as expressly

provided

IN SALES LITERATURE, DRESSER MOONEY

REGULATORS, DRESSER, INC. MAKES NO REPRE-

SENTATION OR WARRANTY OF ANY KIND, EXPRESS

OR IMPLIED, AS TO MERCHANTABILITY, FITNESS FOR

PARTICULAR PURPOSE, OR ANY OTHER MATTER

WITH RESPECT TO ANY OF THE PRODUCTS

While the information in this manual is presented in good faith

and believed to be accurate, Dresser Mooney Regulators,

Dresser, Inc. does not guarantee satisfactory results from

reliance on such information. Dresser Mooney Regulators,

Dresser Inc. reserves the right, without notice, to alter or

improve the designs or specifications of the products

described herein.

Dresser, Inc.

2822 S. 1030 W.
Salt Lake City, Utah 84119
Phone: 801.487.2225 Fax: 801.487.2587

www.dresser.com/mooney

Product Support

Local support is available through our manufactures repre-

sentative and distributor network. Contact the factory or refer

to our web site for your support representative contact infor-

mation. Factory support is available from 8:00AM to 4:30 PM

MST Monday through Friday at 801-487-2225 USA. Limited

after hours support is also available. Complete product speci-

fications, parts lists, and flow calculation software is available

on our web site: www.dressercom/mooney

©2010 Dresser, Inc.
Flowgrid and Mooney are registered trademarks of Dresser, Inc.
Slam Shut is a trademark of Dresser, Inc.

Flowgrid Slam Shut Installation & Operations Manual

1.11

Содержание MOONEY FLOWGRID SLAM SHUT





















Результаты поиска

Содержание MOONEY FLOWGRID SLAM SHUT

Отзывы:

Похожие инструкции для MOONEY FLOWGRID SLAM SHUT

Бренды по названию

Популярные бренды

Dresser MOONEY FLOWGRID SLAM SHUT, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание MOONEY FLOWGRID SLAM SHUT

Отзывы:

Похожие инструкции для MOONEY FLOWGRID SLAM SHUT

Бренды по названию

Популярные бренды