© NEUREITER | Original-Manual Version 2.0
11
Tool recommendations for assembly:
•
14 mm wrench to mount the four feet, Phillips screwdriver, Allen key for loosening the lowering guard before the face plate
is unscrewed with the Face plate wrench from the spindle.
Delivery contents
A
Lathe bed with headstock, Tailstock with Live center (MT2), Tool rest base
B
Frequency converter (FC)
C
Digital speed display and Movable control unit
D
80 mm Face plate with M33 x 3.5 mm threads and two 5 mm Lowering guard allen screws
C
4-Prong Spur center 25 mm (MT2)
A
D
E
C
B
Assembly information:
We carefully packaged the machine at our site. Upon receipt, please check the packaging for damage or whether the machine
has become damaged during transport as well as whether the contents are complete. In the event of complaints, please report
them to your supplier immediately and do not start using the machine. Claims at a later stage will not be accepted. Using this
machine with others can lead to loss of warranty.
The packaging is made of raw material and can be returned to the raw materials cycle via the available local collection sites. Dis-
pose of the packaging material only when the wood turning lathe has been assembled and is functioning properly.
Carefully read the operating manual beforehand!
• Be aware of the weight of the lathe and hand-
le them carefully to avoid causing yourself any
injuries. For transportation of the lathe use the
handles.
• Ensure that all bolted joints are tight but not
over-tightened. Check all bolted joints for tight-
ness after eight operating hours.
• Do not connect the mains plug to the shockproof
socket until the assembly is completed
Warning!
Fig. 5
