Dreamus Astell & Kern AK TWS UW100, Инструкция

Страница: 12 / 28

Getting Started
11
User Guide
If one earbud gets disconnected during use, touch the
disconnected earbud for 20 seconds to reconnect.
Bluetooth pairing mode will turn off if the earbuds and
mobile device are not connected within 3 minutes. If you
close and reopen the charging case, the earbuds will
enter Bluetooth pairing mode.
Make sure to check and adjust the Bluetooth volume to
the appropriate level after pairing is complete. A high
volume can cause hearing damage.
When connecting the product to a device, make sure the
product is located close to the device. Failing to do so
may cause malfunction or noise depending on the user’s
environment.
Use the earbuds within 10 meters of the connected
device. The distance between the device and earbuds
may affect the quality of your wireless connection.
Make sure there are no obstacles between the product
and the connected device. Obstacles including other
people, walls, corners, supplementary partitions, etc.,
can affect the quality of your wireless connection. For
best performance, use in a location with no obstacles.
Be careful not to touch the device connected with the
product. It may affect the quality of your wireless connection.
Bluetooth uses the same 2.4 GHz frequency band as
industrial/scientific/medical/electronics devices and
wireless LAN. This can cause interference between
devices and affect the quality of the wireless connection.
Disconnecting from your mobile device
1. You can disconnect the Bluetooth connection to the mobile
device by placing the earbuds in the charging case.
You can also manually disconnect the earbuds by
unregistering them [Settings > Connections >
Bluetooth] from your mobile device.
To reconnect the temporarily disconnected earbuds to
your mobile device, insert the earbuds in the charging
case, then close and reopen the charging case.