Stage
2b
6
8
7
8
Page 5 of 5
P
P
P
P
P
P
Fitting Upgraded Sprung Slat Frame - Use Pack 'B'
G
x4
F
H
x4
E
x4
P
x8
x1
V
x4
6
E
F
G
V
Open the sprung slat frame and lay face down on the working
surface.
Fit the support legs (7
&
8 ) to the positions shown,
securing
with the bolts (P). Fully tighten using Allen key (H).
Carefully turn the slat frame over and position onto the metal
slat supports on each side panel. Align the frame with the
fixing holes at each end and secure using four sets of bolts
(E), spring washers (V), flat washers (G) and sleeve-nuts (F).
When all in place tighten using Allen key (H).
Finally, please check carefully that all bolts are fully
tightened before the bed is used.
