Qty
Code
Description
A
x12
Fittings Checklist
C
x12
Spring Washers (for M8 bolt)
D
Qty
Code
Description
B
Allen Key (for M8 bolt)
x1
Page 2 of 5
Bolts (M8x30mm) for
fitting side panels (3)
to headboard & footboard (1&2).
Flat Washers (for M8 bolt)
V
x6
Spring Washers (for M6 bolt
)
P
Bolts (M6x15mm) for fitting
support legs ( 7&8) to
the
sprung slat frame (6)
x8
EXTRA HARDWARE NEEDED WHEN FITTING UPGRADED SPRUNG SLAT FRAME
Note:
The
following fittings will be found in the box which contains the upgraded metal frame itself.
7
Sprung slat frame
centre support leg
Sprung slat frame support legs
x1
8
x2
Qty
HARDWARE FOR FITTING WOOD SLATS OR UPGRADED SPRUNG SLAT FRAME (PACK B)
H
x1
Allen Key (for M6 bolt)
F
x6
Sleeve Nuts - M6
Bolts (M6x40mm) for fitting
the wooden slat
set (
4
) or
the sprung slat frame (
6
)
to side panels (3)
x6
x7
Flat Washers (for M6 bolt & 5mm screw)
G
E
Screw for Slat Support Leg (
5
) - 5mm
U
x1
HARDWARE NEEDED FOR BED ASSEMBLY (PACK A)
x12
Code
Description
Qty Code Description
In the unlikely event of missing parts, please contact
the customer service team on 0
3
442 92
00
00.
When
calling
this
number,
please
quote
the
part
code reference numbers shown in this leaflet when
requesting spare or replacement parts.
Please
retain
your
assembly instruction and
tools provided for future use.
Periodically check that all bolts are still tight.
This
assembly
requires
two persons.
Additional Tools Required
General Hints & Tips
Intersecting
Hole
Care & Maintenance
Cross-head Screwdriver
When they are supplied and are
part of the assembly of this bed,
ensure that the barrel nuts are
fitted the correct way so the
hole in the nut is facing towards
the intersecting hole in the panel.
We
recommend
the
bed is
assembled in
the
room it shall be
located in.
Approximate time to
assemble this product
3/4
HOUR
