9
MIRAGE-X manual Ver 1 Rev 1 12/2015
2
1
4
3
5
Fig 7
Fig 8
Stationary
Glass
0.5mm Bottom Spacer Strip (#14)
cut 2”pcs
8.
Cut the 0.5mm Bottom Spacer Strip (#14) into
three to four 2” pieces and place them into the
Bottom Guide Rail (#03) to protect the bottom of
the Stationary Glass (#01).
Be sure to position 0.5mm Bottom Spacer Strips
(#14) beneath both of the bottom corners of the
Stationary Glass (#01).
See Fig 08 for details
7.
Mark the Wall Profile’s (#17) position on the
wall and also mark the hole locations for drilling.
Remove the Wall Profile (#17) and drill
Ø5/16”(6mm) holes into the wall.
Insert the Wall Anchors (#06).
Apply a bead of silicone to the wall or to the back of
the Wall Profile (#17).
Attach the Wall Profile (#17) to the wall using the
ST4.2 x 40 screws (#07).
See Fig 7 for details
Ø5/16” (8mm)