Dreamline MIRAGE-X SHDR-1948723L Series Скачать руководство пользователя

Страница: 21 / 22

Product Maintenance

BASES and BACKWALLS: To ensure a long life for your acrylic back walls: wipe them off after

each use with a soft cloth. To clean the acrylic back walls use non-abrasive sprays or cream

based cleaners. Never use abrasive cleansers, metal brushes or scrapers that could scratch or

dull the surface.

GLASS: To ensure long lasting life for your glass shower products: wipe them off after each use

with a soft cloth. Rinse and wipe off the glass using either a soft cloth or a squeegee to prevent

soap buildup and water spots. To prevent scratching the surface: never use abrasive cleaners

and cleaning products that contain scouring agents. Never use bristle brushes or abrasive

sponges.

HARDWARE: To ensure a long lasting finish: wipe off the metal parts after each use with a soft

cloth. Do not use abrasive cleaners or cleaning products containing ammonia, bleach or acid. If

accidentally used, rinse the surface as soon as possible to prevent finish peeling or corrosion.

After cleaning the shiny finishes, rinse thoroughly and wipe dry with soft cloth. Never use

abrasive sponge or cloth, steel wool or wired brushes

MIRAGE-X manual Ver 1 Rev 1 12/2015

Содержание MIRAGE-X SHDR-1948723L Series























Результаты поиска

Содержание MIRAGE-X SHDR-1948723L Series

Отзывы:

Похожие инструкции для MIRAGE-X SHDR-1948723L Series

Бренды по названию

Популярные бренды

Dreamline MIRAGE-X SHDR-1948723L Series, Руководство по установке

Результаты поиска

Содержание MIRAGE-X SHDR-1948723L Series

Отзывы:

Похожие инструкции для MIRAGE-X SHDR-1948723L Series

Бренды по названию

Популярные бренды