© DreamLine
All Rights Reserved
© DreamLine
All Rights Reserved
Preparation
1. Prior to installation, examine all boxes and packages for shipping damage and compare the piece
count with the packing slip. After opening all boxes and packages read this introduction carefully.
Check that all of the necessary parts are included in the package by checking off the components on
the “Detailed Diagram of Shower Door Components”. If the unit has been damaged, has a finishing
defect, or has missing parts, please contact our customer support department within
3 business
days
of the delivery date.
Please note that DreamLine
®
will not replace any damaged products
or missing parts free of charge after 3 business days or if the product has been installed.
Feel
free to contact DreamLine
®
if you have any questions, and please provide an order number, job
name or other proof of purchase to help identify the original order.
2.
Please note that you should consult your local building codes with questions on installation
compliance standards. Building and plumbing codes may vary by location, and DreamLine
®
is
not responsible for code compliance standards for your project and will not accept any
returns.
3. If this unit is going to be installed in new construction, please install all of the required plumbing
and drainage before installing the shower. Use a competent and licensed (if required by local code)
plumber for all plumbing installation.
4. Make sure that prior to beginning the installation, the surfaces are leveled and solid and will be
able to support the total weight of the unit. Also make sure the walls are at right angles. Irregular
installation surface level, radius corners or improper angle of side walls will result in serious prob-
lems for your installation. Note that some adjustments and drilling will be necessary during the
installation process.
5. Protect all primary surfaces of the product during installation. Never set the glass down directly
onto a tile floor. Leave corner protectors in place until necessary to remove them. Always use a piece
of wood or cardboard to protect the bottom edge and corners of the glass prior to and during
installation.
6.
This unit must be installed upon a finished threshold and against finished walls.
7.
This model has 1/2” of adjustment for out-of-plumb wall conditions within the wall profiles and
3“ of adjustment with the expanding rails for the door section. Verify that your walls are plumb and
that the threshold is level before proceeding with the installation.
8.
This model requires a minumum of
1-1/2”
of flat threshold space for installation.
9.
Professional installation recommended.
NOTE:
DO NOT
attach the handle to the door glass until instructed.
DO NOT
attempt to lift the door glass with the handle as this may result in
damage to the glass and/or serious personal injury. Use a professional grade
glass suction cup and an assistant.
4
FLEX Shower Enclosure Panel manual Ver 3 Rev 4 072019
©2019 DreamLine. All Rights Reserved
!
