Dreamline Charisma Slimline DLT-1032320, Руководство по установке

Страница: 25 / 49

© DreamLine
®
All Rights Reserved
© DreamLine
®
All Rights Reserved
WARNING DISCLOSURE STATEMENT
WARNING DISCLOSURE STATEMENT
IMPORTANT
• DreamLine® reserves the right to alter, modify or redesign products any time without
prior notice for product improvement and customer experience. Please refer to the
model’s web page on
DreamLine.com for the latest technical drawings, installation
manuals, warranty information or additional product details.
•
This product should be installed by someone familiar with the construction requirements
for this type of project and the care necessary for the safe installation and operation of
the product.
•
The safety of any installation is the responsibility of the installer.
•
Professional installation recommended.
(All Models)
• Professional installation required. (Enigma Series)
•
To prevent damage or serious injury, Do Not lean against the installed panel/door/glass.
• To prevent damage or serious injury: Do Not attempt to lift or move a heavy lite of glass
alone. Use an assistant and/or a professional grade glass suction cup.
• The installation of some models may require drilling down into the threshold. Contact the
manufacturer of the base, tub, or threshold material with any questions regarding the
drilling of holes into their product.
•
All drawings in this installation manual are for illustrative purposes only and are not drawn
to scale.
TEMPERED GLASS WARNING
•
Your Shower Door Glass Could Shatter Without Warning if Improperly Installed or
Mishandled
•
Do Not install or operate a shower door if the glass has chipped corners, slivered edges or
is otherwise damaged and/or has been dropped or banged into a hard surface such as
tile, marble or glass.
• The main causes of tempered glass breakage are:
o Improper handling, storage or installation
o
Misuse/abuse
o
Lack of maintenance
o
Failure to replace damaged glass
o
Improper handling during storage, unpacking and installation:
o
Corners and edges are the most susceptible area to damage on a lite of tempered
glass and should be protected and handled with care during storage, unpacking,
installation and operation. A concentrated point of pressure or impact with a surface
harder than itself may cause the tempered glass to shatter. The tempered glass may
release immediately, within several hours or even days later.
o
Incorrect installation of door hardware, rollers, hinges, channels, stopper or glass:
o
Improper installation may include: loose hardware and/or lack of proper gaskets
between the hardware and glass. Additionally, improper alignment of guide rails, wall
profiles or other hardware during installation or operation may place stress on the
glass edges and cause it to break.
o
This product must be installed by a professional and experienced installer familiar with
the safe handling of tempered glass.
o Improper use of this product:
o
Aggressively opening or closing the door may cause trauma to the glass, which can
lead to breakage. This may occur immediately or hours or even days later.
o
The shower door hardware and glass should be inspected periodically:
 Instruct the homeowner how to perform a periodic inspection of the shower
hardware and glass - some minor adjustments may be necessary based upon
the use (or misuse) of the shower door. Ensure that the hardware remains tight
and that the door alignment and operation are correct. Any adjustments
should be made upon discovery to prevent damage to the product.
 Additional considerations should be given to the installation of frameless
tempered glass products in households with young children or an elderly
person due to an increased chance of improper handling. In such cases,
alternatives such as shower curtains or grab bars should be considered.
GENERAL PREPARATION
• After opening all boxes and packages, read this introduction carefully. Check that all the
items are included in the package by marking off the components on the
“Detailed
Diagram of Product Components” page. Examine all boxes and packages for shipping
damage. If the unit has been damaged, has a finishing defect, or is missing parts; please
contact our Customer Support department within 3 business days of the delivery date.
Please note that DreamLine® will not replace any damaged products or missing
parts free of charge after 3 business days or if the product has been installed.
Please
contact DreamLine® if you have any questions.
• Please note that you should refer to your local building codes with questions on
installation compliance standards. Building and plumbing codes may vary by
location, and DreamLine® is not responsible for code compliance standards for your
project and will not accept any returns.
•
If this unit is going to be installed in a new construction, install all the required plumbing
and drainage before installing the shower.
Use a competent and licensed (if required
by local code) plumber for all plumbing installation.
•
Make sure that prior to beginning the installation, the surfaces are leveled and solid and
will be able to support the total weight of the unit. Also make sure the walls are at right
angles. Irregular installation surface level, radius corners or improper angle of side walls
will result in serious problems for your installation. Please note that some adjustments
and drilling will be necessary during the installation process.
•
Protect all primary surfaces of the product during installation. Never set your glass down
directly onto a tile floor. Leave corner protectors in place until it is necessary to remove
them. Always use a piece of wood or cardboard to protect the bottom edge and corners
of the glass prior to and during installation.
•
This unit must be installed upon a finished threshold and against finished walls.
•
DreamLine
®
shower doors are not designed to be installed into a fiberglass surround due
to the radius corners and lack of a solid surface to mount the hardware.
WARNING: TO AVOID THE RISK OF DAMAGE OR INJURY:
• Follow all recommendations and requirements as shown in the installation
instructions.
•
Perform a thorough inspection of the glass and all parts for any damage prior to
installation. Any damage to tempered glass can cause breakage.
Do Not install damaged glass!
• Do Not install or operate a shower or tub door if the glass has chipped corners, slivered
edges or is otherwise damaged. Do Not install or operate a shower or tub door that has
been dropped or banged into a hard surface such as tile, marble or glass.
• CAUTION: Contact with any hard surface can damage tempered glass and cause it to
shatter.
• This product uses tempered glass. Glass cannot be cut after it has been tempered.
Do Not attempt to cut tempered glass.
•
DreamLine
®
Glass Shower doors, Tub doors, Inline panels, and Return panels can shatter
due to improper handling or lack of maintenance. Conduct periodic inspections of glass
and all parts for possible damage, missing or loose parts.
• Always wear proper safety equipment such as: safety goggles, work gloves and
appropriate footwear during the installation process.
•
WARNING. Risk of leakage and/or damage.
Follow all instructions regarding the
application of silicone sealant or caulk. Allow 24 hours for the sealant to cure before the
initial use of the shower or tub product. Follow the silicone manufacturer’s
recommendations regarding the use of their product.
•
Thoroughly read these instructions before installing or using this product.
•
Leave this manual for the end-user of the product.
CHARISMA Shower Door Manual Ver 4 052020 2
©2020 DreamLine
®
All Rights Reserved
!
This product should be installed by someone familiar with the
construction requirements for this type of project and the care
necessary for the safe installation and operation of the product.
Professional Installation
Recommended
!
Certified Professional