background image

www.dreamonme.com/help

14

FURNITURE CARE INSTRUCTIONS

ROOM CLIMATE CONTROL:

• Wood, when first cut contains more than 50 percent water. When it is prepared for 

furniture construction it is placed in a Kiln and the moisture content is brought down 
to 8 to 10 percent. Wood is porous and responds to its environment. If the room has 
high humidity it will absorb it and expand and if the humidity is low it will lose 
moisture and shrink.

• It is important that the humidity levels in the room be controlled from extremes of 

too much humidity or too little. Furniture should not be placed close to the 
air-conditioning outlets, fire places, radiators, space heaters, humidifiers or 
dehumidifiers. Exposure to extreme variations of temperature and humidity can 
damage any fine wood product.

THE IDEAL ENVIRONMENT FOR FINE FURNITURE:

• Fine wood furniture will have fewer problems when its environment is controlled at a 

temperature between 65 and 75 degrees and a relative humidity between 35 and 40 
percent. Wood placed in an environment outside of those limits can and will shrink 
or expand and may develop some small cracks which are not material or structural 
defects.

STICKING DOORS AND DRAWERS:

• With the minor changes in temperature and humidity, doors and drawers may swell 

and be difficult to open or close. Tolerances have been built into the units but 
extreme conditions may still cause sticking. This will adjust back to normal over 
time but until it does consider using a dehumidifier or rub candle wax or paraffin on 
sides that stick.

AVOID DIRECT SUNLIGHT:

• Keep the furniture out of direct sunlight. Ultraviolet rays will fade colors and in some 

cases darken them. It can also cause crazing or hair line cracks in the finish. White 
finishes will yellow naturally over time and exposure to direct sunlight will hasten 
this natural process along with some woods darkening naturally over time; this is 
not considered to be a quality defect.

PROPER STORAGE:

• If you need to put your furniture in storage for any period of time do not store them 

in a damp basement or hot dry attic. Allow air movement around the furniture and 
do not stack anything on it.

Содержание UNIVERSAL THREE DRAWERS DRESSER

















Отзывы: