www.dreamonme.com/help
7
Bolt 1-3/4” (×6)
A
Bolt 1” (×2)
B
Curve Washer (×6)
D
(2)
(2)
(5)
(4)
(5)
(6)
(7)
(7)
(8)
(B)
(B)
(A)
(D)
(A,D)
1
DRESSER ASSEMBLY - DRESSER FRAME ASSEMBLY
1a. Place the Dresser Left Side Panel
(2) on a soft surface, align the
Dresser Rear Top Panel (4) and
Dresser Rear Bottom Panel (5) as
shown in the diagram.
1b. Insert the Curve Washer (D) into
the Bolt (A) and use the same to
attach the Rear Top Panel (4) and
Rear Bottom Panel (5). Ensure not
to overtighten the bolts.
1c. Similarly, use the Curve Washer (D)
and the Bolt (A) assembly to attach
the Dresser Top Front Rail (6) and
Dresser Bottom Front Rail (8) to the
Dresser Left Side Panel (2).
1d. Attach both Dresser Center Front
Rails (7) using Bolts (B) to the
insertions at the center of the
Dresser Left Side Panel (2).
