6.
Locate and install two wing clamp screws into wing clamps as shown below. Firmly tighten the wing clamp
screw in each panel. The wing clamp screws can be loosened at any point to remove wing panels for travel
and storage.
7.
IMPORTANT:
For added security during
aggressive side-arm launches, please
wrap a strip of tape (
Blenderm 1525-0
)
around each wing joint at the leading
edge as shown. It is possible for the
wing clamp to loosen after a hard
landing or a few "aggressive" launches.
This can result in the wing separating
from the fuselage during a sidearm
launch. Between flights, make sure to
inspect your wing joints for any signs of
loosening or separation.
9.
