54/57
Amazon Alexa
®
Amazon Alexa
®
(Alexa) is an intelligent personal
assistant developed by Amazon
®
, and is
capable of voice interaction.
Wiser works with Alexa to allow you to regulate
the temperature of each room in your system
by using a wake-word and an instruction.
The wake-work is “Alexa” followed by an
instruction such as “increase temperature.”
Currently, Amazon has made interaction and
communication with Alexa only available in
English and German.
Alexa requires explicit instructions. You must
inform Alexa of the room to which you wish to
address followed by an instruction, such as
“increase temperature.” If no specific room
is mentioned, Alexa will ask you which room
you want to address, and then will increase
the setpoint temperature by 1°C only based
on the room reply from you. If you want the
setpoint temperature to increase by 4°C in the
living room, you must explicitly state to Alexa
to “increase the temperature in the living room
by 4°C.”
Note:
If Alexa is asked to increase the
temperature by 2°C, then Alexa will add 2°C
to your setpoint. If the ambient temperature is
already >2°C above the current setpoint then the
actual temperature will not change and Wiser will
not turn the heating ON.
Example: If the current setpoint is 16°C, the
current room temperature is 19°C and you
ask Alexa to increase the temperature by 2°C
- the current setpoint will change to 18°C but
the heating will not start because the room
temperature is already higher than 18°C.
Everything you tell Alexa to do related
to Wiser Room Thermostats and Radiator
Thermostats will last only for one hour, or until
the next scheduled setpoint change if that
change is to occur in under an hour. After that it
goes back to its original setting, and you must
tell Alexa to do it again.
If you turned the hot water ON in the
Wiser Heat app
and then tell Alexa to turn it off,
it stays OFF only for one hour and then goes
back ON. For long term or permanent changes
you can change the schedule in the
Wiser Heat
app
to avoid repeating the same instruction to
Alexa.
If a Wiser Plug is running in Auto Mode,
everything you tell Alexa to do related to Wiser
Plugs will last until the next event in the Wiser
Plug schedule. If the Wiser Plug is running in
Manual Mode, everything you tell Alexa to do
will remain in place until the next command
either from Alexa or from the
Wiser Heat app.
Common Wiser commands for Alexa
Listed below are common Wiser commands
used with Alexa:
• Discover Devices: “Alexa, discover devices”
• Reduce Temperature: “Alexa, decrease the
upstairs by 4 degrees”
• Increase Temperature: “Alexa, increase the
upstairs by 3 degrees”
• Set Temperature: “Alexa, set the upstairs to 20
degrees”
• Get Temperature: “Alexa, what is the upstairs
temperature?”
• Get Set Point: “Alexa, what is the upstairs set
to?”
• Turn Off the Hot Water: “Alexa, turn OFF the
hot water”
• Turn ON the Hot Water: “Alexa, turn ON the
hot water”
Note:
Alexa considers the room names and hot
water as the devices
Listed below are common Wiser Plug commands
used with Alexa:
• Turn ON/Off the Table lamp: “Alexa, turn ON/
OFF the Table lamp”
Listed below are suggested when using Alexa:
• Simple room names are recommended, such
as “living room.”
• You cannot turn Heating ON or Off using
Alexa.
• You cannot increase/decrease the temperature
from Off. When a room is set to Off, you can
adjust the room to a specific temperature.
Содержание Wiser
