Drayton Wiser, Руководство пользователя

Страница: 10 / 57

10/57
Set up a system
Join devices to the Heat Hub
R
Add a Room Thermostat
The room thermostat must be joined to the Heat
Hub
R
as follows:
Insert the batteries and join the network
Insert the batteries into the room
thermostat.
Ensure the polarity of the batteries (+
and - ends) is correctly oriented. The
polarity is indicated on the device’s
terminals.
Close the battery compartments.
Place/Mount the Room Thermostat
The
Wiser Heat app
assigns this room
thermostat to the named room.
Place this room thermostat in the room, either
on the wall or on the provided desk stand.
Follow the messages on the room
thermostat’s display to join the network.
Press
O
to initiate the connection.
No network found? The Heat Hub
R
has
timed out
If the Heat Hub
R
Set-up Mode has timed out
(the Setup LED shows a solid green), repeat
the set-up step.
No network found? The Heat Hub
R
is still in
Set-up Mode
If the Heat Hub
R
is still in Set-up Mode (the
Setup LED is flashing green), then the room
thermostat is too far away from the Heat Hub
R
.
In this case, choose another location for the
room thermostat or install a smart plug as a RF
signal range extender. Have a look at: Getting
to know the smart plug -> page 41
Do you want to move the room
thermostat to another room?
Have a look here: Moving the room
thermostats ->page 46.