8
THE 24-HOUR PROGRAM
This is the simplest program – every day’s the same. Just
follow the sequence, setting the central heating times first –
then the hot water.
Want to leave a timing as it is? Just press SET? and move on
to the next one.
Need to delete your timings and start again? Press ‘SET’ and
‘+’ together to go back to the pre-set program.
If you don’t press anything for two minutes, the programmer
automatically goes back to normal operation.
These instructions are for setting the central heating and hot
water independently on a 24-hour cycle that will be the same for
every day of the week. If your settings are linked, then CH and
HW won’t appear in the display and you’ll only need to go
through the procedure once.
Set the central heating
Press the SET? button and you’ll see
‘SET PROG?’.
Press the YES button, and the display will ask ‘SET CH PROG?’
Press YES and you’ll see ON1, the start of your first central
heating period. Adjust it in 1-minute steps using the – and +
buttons. If the – and + buttons are held down, the time
changes in 10-minute steps.
SET
PROG?
CH
SET
PROG?
