10
These instructions are for setting your central heating and hot
water independently, with the same timings for weekdays and
different ones for the weekend. If your settings are linked, then
CH and HW won’t appear in the display and you’ll only need to
go through the weekday and weekend phases once.
Set weekday central heating
Press the SET? button and you’ll see ‘SET PROG?’.
Press the YES button, and the display will ask ‘SET CH MON to
FRI PROG?’
Press YES and you’ll see ON1, the start of your first central
heating period. Adjust it in 1-minute steps using the – and +
buttons. If the – and + buttons are held down, the time
changes in 10-minute steps.
Press SET?, and you’ll see OFF1, the end of your first central
heating period. Adjust this in the same way, press SET?, then
repeat the procedure for ON2, OFF2, ON3 and OFF3.
PROG?
MON TUE WED THU FRI
CH
SET
PROG?
