VigorPro5300 Series User’s Guide
36
PPP Setup
PPP Authentication
- Select
PAP only
or
PAP or CHAP
for PPP.
Idle Timeout
- Set the timeout for breaking down the Internet after
passing through the time without any action. This setting is active
only when the
Active on demand
option for Active Mode is
selected in
WAN>> General Setup
page.
IP Address
Assignment
Method(IPCP)
Fixed IP
- Usually ISP dynamically assigns IP address to you
each time you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP address
in the Fixed IP field. Please contact your ISP before you want to
use this function. Click
Yes
to use this function and type in a
fixed IP address in the box.
Fixed IP Address -
Type a fixed IP address.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Default MAC Address
– Click this radio button to use default
MAC address for the router.
Specify a MAC Address
- Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the
Specify a MAC Address
and enter the MAC
address in the MAC Address field.
WAN IP Network
Settings
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically.
Specify an IP address
– Click this radio button to specify some
data.
IP Address
– Type the IP address.
Subnet Mask
– Type the subnet mask.
Содержание VigorPro 5300
